Archive for the 'Award' Category

Apply for the 2015 NESEA Zero Net Energy Building Award

Just saw this post on the NESEA site go up yesterday. Looks like they are now accepting entries for the 2015 award.

If you have built or live in a home that has produced more energy than it uses in the last year, then I encourage you to enter the competition. They have worked to make the application process a bit easier this year and the benefits of winning include not only the prize money, but also a chance to meet some of the leading proponents and practitioners of building net zero structures at the yearly conference when they announce the winner. You also get your building’s picture on the cover of BuildingEnergy magazine.

I highly recommend you apply, it is well worth the effort. Do it quickly, the deadline is December 15.

Good luck!

Designing and building your own net zero home

We wrote this article in June for the Fall 2014 issue of BuildingEnergy Magazine. Edited by Mark J. McCourt.

Designing and building your own home can be a huge challenge. It can be even more daunting if you set your sights on a high performance home that will produce more power each year than it uses. Thankfully, there are a ton of resources online—at times too many—that can help make those challenges more manageable. I am not, however, suggesting that any homeowner can do this without considerable learning or prior design build experience.

Jill and I are both designers. Jill works in graphic design and I work in the technology industry to make online applications easier and more intuitive to use. I studied architecture in school and paid for college in the early years by working for builders and a mason. It wasn’t out of concern for the budget that we did not hire an architect; in fact, an architect experienced in high performance homes would have likely saved us time and money. We simply wanted to do it ourselves because we enjoy the challenge and we had confidence we could do it well. We also knew when to ask for help.

We hired DEAP Group to estimate our peak heating load, specify our ventilation requirements and estimate how much solar we would need to achieve net zero. They also offered a number of recommendations that boosted our efficiency further. Please do not rely on anyone without experience in high performance homes to do this type of work for you; our energy star rater had zero experience with homes of our type. Based on their calculations, the heating load would have been half DEAP’s estimate, and our total usage would have been twice DEAP’s estimate. If we had followed our energy star estimate, we would have needed a 12 kW system to net out. Our first year actuals came very close to DEAP’s estimate.

One of our most important decisions was picking a contractor. Ideally we wanted someone that had experience building a net zero home, but there was no one in our rural area. We found W.R. Coolidge and Co., an experienced builder next door, that was interested in high performance homes and was eager to learn with us. Most importantly, he was willing to let us do as much of the work as we felt comfortable doing ourselves, and show us how to do it right.

Since we were involved in every decision and I had built detailed 3D models of almost every house system and detail, it was easy for us to coordinate the work of the contractors responsible for the foundation, electrical, plumbing, HVAC, cellulose insulation and solar PV installation. All of this required a great deal of time, research and planning; it is one of the reasons it took us more than 18 months to complete the house.

Throughout the process we posted much of our thinking and analysis in our blog, The technology community places a great deal of value on open-source work. Sharing your work has several benefits: it creates opportunities for others to comment and make suggestions for improvements; it makes it easier for others to follow in your footsteps with less risk and more confidence; and most importantly, the act of sharing requires you to explain what you’re doing and why, in simple and clear terms. This forces you to think things through much more carefully. If your logic or calculation has a flaw, you want to make sure you find it before you tell the world about it.

After we moved in, we installed sensors to track the performance of our home. All our data is posted online at, for anyone to view and analyze. We collect and post our data for several reasons. We believe data should be open and accessible so that others can benefit from our experience. We want to know how the house actually performs, as compared to the estimates. We want to prove whether we have met our goals or not; if we have not, then we need to understand why.

We have been extremely lucky. It is a very comfortable home even in the deepest, coldest days and months of an upstate New York winter. In our first two years living in the house, we produced more energy than we used, despite the addition of a barn, dairy goats, chickens, turkeys, other assorted critters and a plug-in hybrid vehicle. This year, winter temperatures were much colder, and we are attempting to raise more of our own food, both of which use more energy. Last year, we passed into net positive territory in early June. This year we were still 1,121 kWh short at the end of May, a 1,000 kWh difference from 2013. We still expect us to generate a surplus in 2014, but it will be close.

So don’t go it alone unless you’re prepared to invest a significant amount of time researching and learning the nuances of high-performance building. If you don’t have 100 percent confidence in what you’re doing and why, it’s too easy for contractors to convince you that it’s too hard or too expensive to do it that way. Your house will suffer from a thousand small decisions that will ultimately undo your original goal: to live more sustainably in a net-zero home.

Larry & Jill

We’re on the cover of BuildingEnergy magazine!

Pic of BuildingEnergy Magazine

We’re on the cover of Building Energy magazine, Fall 2014.

There is a description of the entries to the 2014 Zero Net Energy Building Award, and an article we wrote to go along with our entry.

It’s not available online yet, but when it is, it should be available from the NESEA BuildingEnergy Magazine page.

* Note to magazine editor, the last name is Burks, not Burk. The home is in New York, not New Hampshire. CFM stands for Cubic Feet per Minute, not Cubic Feet per Meter.

2014 Zero Net Energy Building Award

poster in lobby

We won! Thanks to the Northeast Sustainable Energy Association (NESEA) for awarding us the 2014 Zero Energy Building Award at the Building Energy Conference (BE14) in Boston this week. Gina McCarthy of the EPA gave a rousing keynote, and shortly after Jill and I were called onstage to receive the award.

At the afternoon lunch panel discussion we gave a short presentation about the house along with a few other contestants including Carter Scott. It was a great crowd with good questions.

But the best part was getting to meet a few of my energy heroes.

Marc Rosenbaum

Marc Rosenbaum

Marc Rosenbaum is EnergySmiths and keeps a great blog at Thriving on Low Carbon. His name always pops up on interesting projects around New England and he knows his data, particularly when it comes to heat pumps. I’ve followed his writings and work for several years now. It was a pleasure to meet him in person.

Carter Scott

Carter Scott

I was also fortunate to meet Carter Scott of Transformations. I was still considering large masonry stoves, radiant floors and solar hot water in late 2009 when Jill and I were kicking around plans and researching different heating strategies. Then I found an article in Solar Today (2008) about a house Carter Scott was building for the Zero Energy Home Challenge in Massachusetts. This is also how I found Mike Duclos and our energy consultants, DEAP Energy Group. These houses featured double stud walls packed with cellulose, an air-source heat pump and solar PV. I was sold on the idea.

Selfie with Warren Coolidge

Our contractor, Warren Coolidge

And speaking of heroes, I also want to thank our contractor Warren Coolidge. He took time out of his busy schedule and made the long drive to Boston to join us at the conference. Warren listened to all my crazy energy ideas and found ways to help us build the house, and keep it on budget (most of the time).  He is a true craftsman and I very much enjoyed working with him. I don’t sell anything on this site, but if you want to build a net zero house in Washington County, New York, hire this man. You won’t be sorry.

We’ll be opening up the house again for NESEA’s Green Building Open House tour in October. See the house, the goats, chickens and turkeys. I’m sure Jill will also have some home-made cheese available. Mark your calendars and come visit us!

Latest Uphill Tweets

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 305 other followers