Archive for the 'Surveying' Category

Preliminary Survey Results

Tonight I completed a sketch of the preliminary survey results. If you’ve been reading the earlier posts, you’ll recall that I’m using a transit level to survey the current driveway in order to figure out the path of the new driveway. Its been a bit of a slow process. The terrain is so steep that it takes a lot of setups with the instrument to measure the elevations. Plus the dense summer foliage has slowed us down considerably.

Thus far we’ve measured approximately 470 horizontal feet and 94.7 vertical feet from the access road to the top of the drive near the log cabin. That sets the drive at approx. 20% slope. I used 5′ intervals to show the elevations starting at the road. There’s some parts that are very steep, and other areas that are just regular steep.

This may be the end of the surveying till late fall, when the leaves drop and we have better visibility with the instrument.

New house design, no kidding

Well we were all excited to head up to Massachusetts today for our Nigerian Dwarf Goat Kidding Class (baby goats are called kids), but due to bad weather in MA the class was postponed. We will try again next weekend, but most likely without the actual kidding experience.

So instead we worked out a new house design this weekend. Actually there have been multiple versions since the last house design posting, but very few have legs. The version shown above was inspired by an article in this month’s Fine Homebuilding. It’s a very early version of this layout, but I like how several things are working. It descends down the hill, working with the terrain. It also has a sheltered deck with plenty of open views and a small basement despite the one story spread. Other than the stepping, the geometry is quite simple (ignore the plethora of windows and textures for now).

The cons are that it’s one level (meaning more roof and more foundation work) and it’s more spread out (meaning more surface area to bleed heat to the winter winds.) It’s not the final design, but it’s the second design that seems worthy of posting. We still have a year or more, so nothing final yet (sorry Jill).

The Site

As some of you may know, I studied architecture in my early days. In fact I wanted to be an architect from an early age when I started copying plans out of ‘Better Homes and Gardens’ magazine. So after ten long years out of architecture grad school, I’m finally getting to design our own home. (If you recall from the very first post on this blog ‘Decision‘, one of the reasons we decided to buy property was because we couldn’t imagine paying a huge mortgage to live in something that was never going to be what we really wanted.)

Well obviously I’ve been imagining all sorts of things in my head, but as the winter approaches and we take fewer trips upstate, I finally have some time on the weekends to start the formal design process. The first step in any architectural process is to study and model the site. After 3 months of exploration on the property, we believe we have two choices. That is to say the place we really want to the house to go, and the backup. We need a backup because the drive up to the ideal site will be expensive, both to put in and to maintain.

So first, the primary site. There are several practical considerations that must be satisfied, among them, 1) access to sunlight (e.g. south-facing). 2) Soil conditions that permit the digging of a foundation and installation of a septic system (affectionately referred to an an absorption field). As you recall, we have a lot of rock and ledge. 3) A location for the well up and away from the adsorption field. 4) Proximity to the future barn and finally 5) sufficient distance and passage for the drive so as to not exceed a slope accessible to non-4-wheel drive vehicles. Did I leave anything out? I’m sure I have forgotten something, but we have at least three years to plan the house, so hopefully we’ll figure it out before we try to get a building permit.

In order to site the house we’ll need a good survey of the proposed drive up to the house and the area around the proposed house site. For a build permit we’ll need a professional (certified) survey, but in the meantime I just need a rough survey that is more accurate than the site map we currently have. I’m watching eBay and Craigslist for a used transit level, tripod and measuring rod. I think I should be able to find something reasonably cheaper than paying for a professional survey. I did a bit of surveying in college, and I’ve been researching the topic, so I think I can get reasonably close. I just want to get a better idea of the slope of the driveway and the proposed site, as well as the location of rock outcrops and trees we would like to save. I’m hoping to do the surveying in the early spring before the trees get leafy again and make it more difficult to see distances.

I built the 3D model (at the top of this post) of the site using SketchUp and the property survey that we currently have. Its very rough, but it gives you a good idea what the site looks like without the trees. Each contour is 20 feet. Its roughly 600 vertical feet from the bottom to the top of the hill. I’ve placed a couple of markers so you can see the location of the current cabin and the proposed site, as well as the current and proposed driveway and other points of interest.

I’ve also been doing some rough sketches of the house, but I’ll save that for a future post.

Latest Uphill Tweets

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 305 other followers